Sale Off
HEXIS Super Chrome Arabica Copper Satin HEXIS
HEXIS Super Chrome Arabica Copper Satin HEXIS
HEXIS Super Chrome Arabica Copper Satin HEXIS

HX30000 Series

$269.00
  • Install Difficulty

    Very Hard
  • Application Type

    Dry Apply

  • Technical Specifications
  • Installation & Maintaining
  • Important Notes

Material


High-performance, multi-layered cast film

Film Thickness

90 µm (3.5 mil)

Adhesive Type

Pressure-sensitive, solvent-based acrylic adhesive

Liner

Clear PET film, 100-µm, embossed silicone-coated for surface protection and stability under hygrometric variations.

Application Temperature

+20°C (+68°F); optimal between +20°C and +25°C (+68°F to +95°F)

Operating Temperature

-40°C to +90°C (-40°F to +194°F).

Shelf Life

 2 years when stored in proper conditions

Storage Conditions

+15°C to +25°C (+59°F to +77°F)  with 30–70% relative humidity

Performance Characteristics


Tensile Strength: Minimum 15 N/25 mm (Tested per HEXNFX41021).


Elongation at Break: Minimum 90% (Tested per HEXNFX41021).


Shrinkage (168 hrs at 70°C): < 0.4 mm (Tested per HEXRET001).


Peel Strength at 180°:


After 20 minutes: 15 N/25 mm (Tested per HEXFTM001).


After 24 hours: 19 N/25 mm (Tested per HEXFTM001).


Initial Tack: 17 N/25 mm (Tested per HEXFTM009).


Release: 0.3 N/25 mm (Tested per HEXFTM003).

Application Recommendations


Application Method: Dry application using HEX’PRESS liner technology for easy repositioning and optimal adhesion after squeegeeing.


Heating Temperature: During application, heat between +30°C to +40°C (+86°F to +104°F).


Maximum Deformation: 20% to avoid irreversible appearance changes (whitening, loss of gloss).


Edge Reinforcement: Use RSSEAL sealing tape strips or BODYFENCE patches for border reinforcement.


Pre-Application Testing: Verify compatibility with substrates prone to degassing (e.g., PMMA, polycarbonate). Test compatibility with driver assistance systems.


Surface Preparation: Ensure surfaces are clean, dry, smooth, non-porous, and free of oil, grease, wax, or nanotechnology residues. Follow the Hexis Application Guide for cleaning instructions.

Important Notes


Protective Film: Remove protective film immediately before cutting or application.


Handling: Wear gloves (GANTSCOV) to prevent scratching or marking.


Paint Compatibility: Apply only on original, undamaged, fully dried, and degassed paintwork that meets manufacturer specifications.


Batch Consistency: Use rolls from the same batch for uniform color.


Warranty: Durability estimates are not guarantees. Slight changes in gloss or color are natural over time.


Testing: Conduct feasibility tests for computer-aided cutting and substrate compatibility.

OUR FEATURED INSTALLATION KITS

FIND YOUR ANSWERS HERE

FREQUENTLY ASKED QUESTIONS

Will Vinyl Wrap protect my car from scratches?

Yes, it can protect your paint from light abrasions such as tree branches and some stone chips. 


If you are looking to protect your car then you may be looking for paint protective film (PPF) this is a different product to vinyl wrap.

How long does vinyl wrap last for?

Much like paint, if you leave your car out in the sun all day every day, the vinyl wrap can deteriorate within the first year after installation. If you look after the film by avoiding long UV exposure and maintaining it then you can get up to 8 years out of it.

Will vinyl wrap damage my paint?

No, genuine branded vinyl wrap in most cases will protect your paint from general wear and tear. 

How will I know when the vinyl wrap has to be removed?

You will notice the film becomes quite faded and in some cases may begin to crack or flake. It is highly recommended to remove the film before the deterioration continues otherwise the removal process will become more tedious and time consuming. 

How do I maintain my vinyl wrap?

It is recommended to keep the film washed and clean while only using PH neutral car wash products and avoid rough physical washing processes such as an automatic car wash.

What is PPF?

PPF stands for Paint Protection Film. It is a clear, durable, and flexible polyurethane film designed to protect a vehicle's paint from damage. It serves as a protective layer against scratches, rock chips, road debris, insect stains, and environmental contaminants like UV rays and acid rain.


PPF is specifically designed to protect paint from hard abrasions. 

Can't find an answer to your question?

Email address*

Your question*